Cheap Office Furniture
call us on: 0800 731 3627

0 items, £ 0.00

Free delivery and installation on all our stocked ranges

Standard one-piece locker: Dirty-use locker, 2 doors

Standard one-piece locker: Dirty-use locker, 2 doors
2-door dirty-use locker
  • 180h x 80w x 50d cm overall
  • Light Grey shell with Light Grey doors
  • Dirty-use lockers have central partition

One piece sheet steel shell in a light grey epoxy finish. Locks on each door, upper and lower vents for air circulation. Lockers

We have a range of standalone and linked lockers, for both clean and dirty use.

previous product | back to list | next product
add to cart
Technical details of desk construction (part 1) Most entry level and contract furniture is made in a similar way using industry standard fixings which are usually supplied by just one or two companies. The desk top, which is usually made from melamine faced chipboard, is fitted with screw inserts which are designed to take 4,6, or 8mm bolts or set screws, depending on the application. These inserts are fitted by first drilling an 8 or 10mm hole into the underside of the desktop, and then countersinking the top. The insert is a small aluminium tube, which has a standard 1.0 pitch internal thread, and a very course external thread, designed to cut into the edge of the drilled hole. These inserts are incredibly strong and transmit the loads and forces into the desk top. It is very rare for one of these inserts to fail in normal use

Visit our main office furniture site Google Checkout Explained

secure shopping

2003 - 2008 CHWorkspace. All rights reserved. | Terms and Conditions | Privacy Policy | Sitemap
returns | delivery | about chw shop

Office Furniture Office Chairs Office Desks London Reception Furniture Call Centre Furniture UK Contemporary Office Furniture London Glass Desks London